The Easiest to Follow Shed Plans Online

By: DIYGardenPlans

 

Gable Shed 005

8x8 | 8x10 | 10x8 | 10x10 | 12x10

 

Gambrel Shed with Loft 005

10x10 | 10x12 | 12x10 | 12x12

 

Lean-To Shed 009

4x8 |

 

 

Small Garden Shed 009

4x4 |

 

 

Visit Us At www.DIYGardenPlans.net For More DIY Projects

 

 

See How Easy It Is To Build Your Own Shed!

Free Shed Plans 005

(10x10 gable shed 005)

 

Build your own storage, garden, or tool shed. These free simple to follow shed plans will show you how to build a shed with easy to follow illustrated instructions.

 

 

This Guide Will Show You How To Build A 10x10 Gable Shed

 

shed plans

Width: 10' 2 1/4"

Door opening: hieght 6' 6" width 3' 9"

Wall hieght 7' 10 1/2"

 

 

The shed depth is 10' 1" measured from the trim, hieght 11' 8 1/2"

 

The shed measures 10' by 9' 10 3/4" without the siding.

 

 

Material List for 10x10 Gable Shed 005

 

A material/cut list is included below. Since lumber can be purchased in different sizes, no shopping list is included.

 

Disc. Qty. Size
Material for Foundation
Pressure-Treated 2×6 (Band) 2 9′ 10 3/4″
Pressure-Treated 2×6 (Floor Joist) 6 9′ 9″
Pressure-Treated 4×4 (Skid) 3 9′ 10 3/4″
3/4″ Tongue And Groove Plywood (Floor Decking) 1 4′x8′
3/4″ Tongue And Groove Plywood (Floor Decking) 1 4′x1 10 3/4″
3/4″ Tongue And Groove Plywood (Floor Decking) 1 4′x2′
3/4″ Tongue And Groove Plywood (Floor Decking) 1 4′x7′ 10 3/4″
3/4″ Tongue And Groove Plywood (Floor Decking) 1 2′x8′
3/4″ Tongue And Groove Plywood (Floor Decking) 1 2′x1′ 10 3/4″
Material for Front/Back Wall
2×4 (Plate) 4 10′
2×4 (Plate) 2 9′ 5″
2×4 (Wall Stud) 20 7′ 6″
2×4 (Wall Stud) 2 6′ 4 1/2″
2×4 (Cripple Stud) 4 10″
2×4 (Double Header) 2 4′
1/2″ Plywood (Double Header) 1 3 1/2″ x 4′
5/8″ T1-11 Exterior Siding 3 4′x8′
5/8″ T1-11 Exterior Siding 1 2′x8′
5/8″ T1-11 Exterior Siding 2 3′x8′
Material for Door (6′ 6″ high x 3′ 9″ wide)
1×4 (Jamb) 2 6′ 7 1/2″
1×4 (Lintel) 1 4′ 6″
1×4 (Stile) 2 3′ 9″
1×4 (Stile) 1 3′ 2″
1×4 (Upright) 2 6′ 1/2″
Door Hinges and Latch
Material for Side Walls/Window
2×4 (Wall Stud) 12 7′ 6″
2×4 (Wall Stud) 4 3′ 3 1/2″
2×4 (Wall Stud) 4 9 1/2″
2×4 (Window Frame) 2 3′
2×4 (Window Frame) 1 3′ 3″
2×4 (Double Header) 2 3′ 3″
1/2″ Plywood (Double Header) 1 3 1/2″ x 3′ 3″
2×4 (Plate) 4 9′ 3 3/4″
2×4 (Plate) 2 9′ 10 3/4″
5/8″ T1-11 Exterior Siding 4 4′x8′
5/8″ T1-11 Exterior Siding 2 1′ 10 3/4″x8′
Prefabricated Window (optional) 1 3′x3′
Roof
2×4 (Rafter) 20

6′ 7 1/4″ 30 miter cut both ends same direction

2×4 (Rafter Cross Tie) 6 10′ 60 miter cut both ends opposite direction
1/2″ plywood (Gusset) 30 8″x14″
T1-11 exterior siding For Truss Ends Cut To Size
1/2″ plywood (Roof Decking) 2 4′x6′ 5 1/4″
1/2″ plywood (Roof Decking) 2 2′x6′ 5 1/4″
1/2″ plywood (Roof Decking) 4 2′ 9 3/8″x6′ 5 1/4″
Trim
1×6 (Trim) 4 6′ 8 3/8″ 30 miter cut both ends same direction
1×6 (Trim) 3 8′ cut to size (front/back roof trim)
1/4 plywood (Soffit) 1 4′x8′ cut to size
1×4 (Trim) 4 8′ 1 3/4″ 30 miter cut on one end
1×4 (Trim) 4 7′ 11 3/4″ 30 bevel cut on one end
1×4 (Trim) 2 9′ 5″
Hardware
Roofing Felt
Staples
3-Tab Shingles
Roof Tacks
2″ Galvanized Finishing Nails
1 1/4″ Galvanized Finishing Nails
3 1/2″ Galvanized Nails or Outdoor Screws
2″ Galvanized Nails or Outdoor Screws
Silicone

Free Gable Shed Plans: Page: 1 2 3 4 5 6 7 8 9 10 >>